RLI Heavy Synthetic Food Grade (H1) Grease (NLGI 2) is a food grade1 aluminum complex thickened lubricating grease with a heavy synthetic base oil. It is formulated specifically for the food packaging and processing industry, water treatment, and in other environmental areas were this lubricant may have incidental contact in the application. RLI Heavy Synthetic Food Grade (H1) Grease provides excellent extreme pressure and antiwear protection and can be used over a wide range of operating temperatures. This product provides excellent lubrication in heavy loaded/ slower moving bearings were a 220 cSt base oil gives additional protection.
Typical Data:
| Color | White |
| Thickener | Alum Complex |
| Drop Point ASTM D 566 | 500℉ |
| Base Oil -Viscosity @40℃ cSt ASTM D 445 | 190-240 |
| Viscosity @100℃ cSt ASTM D 445 | 18.6 min |
| Pour Point ASTM D 97 | -10℃ |
| 4-Ball Wear ASTM D 2266 | 0.6 mm |
| 4-Ball EP ASTM D 2596 | 500Kgf |
| Timken OK Load ASTM D 2509. | 40 lbs. |
| Pen, Unwkd ASTM D 217 | 265-295 mm |
| Copper Corrosion ASTM D 130 | 1B |
| Rust Test ASTM D 1743 | Pass |
1 Base oils and additives in this product are listed in 21 CFR 178.3570, Lubricants for incidental food contact (USDA H1). Full compliance with other applicable restrictions of FDA, USDA, oil spill, and oil pollution prevention statutes is recommended. This product is acceptable as a lubricant with incidental food contact (H1) for use in and around food processing areas. Such compounds may be used on food processing equipment as a protective anti-rust film, as a release agent on gaskets or seals of tank closures, and as a lubricant for machine parts and equipment in locations in which there is a potential exposure of the lubricated part to food.