BPL™ Food Grade Bio-Penetrating Lubricant™ NSF H1, H2
A specially formulated, biodegradable biobased penetrant that can be used as a light lubricant in food processing equipment and is essentially odorless and tasteless. Because of the super high viscosity index of the Stabilized* HOBS, this product performs in many applications. BPL™’s patented composition of additives and base fluids provides a protective, thin film lubricant. This natural oily film has shown in laboratory and field tests to out perform petroleum base oils in terms of natural lubricity.
BPL™ Food Grade1 is formulated to penetrate into close tolerant areas, then lubricate, and prevent corrosion. BPL™’s ability to creep is demonstrated by placing a 3/8” x 2” bolt on its head with ¼” of BPL™ in the bottom of a lab beaker; BPL™ creeps vertically up the threads. It protects deep into the core of a cable or chain link and is excellent as a light air tool lubricant and preservative oil for parts. This Biobased product has exceptional benefits over petroleum oils in these applications because there is direct danger of polluting the water, soil, or work environment through loss of the lubricant. BPL™ contains no hazardous volatile organic compounds (VOCs). EPA, OHSA, and Workers Acceptance is high with Biobased Products.
Applications With Incidental Food Contact In and Around Food Processing Equipment Areas
Military Industrial Transportation Marine Agricultural Tools Gaskets/Seals Bearings Bolts Jacks Assembly Parts Wire ropes Chains Dies Machine Tools Hinges Shafts Locks Linkage Cables Air Valves Air Tools
NSF Registration: 140448 H1, H2
Typical Data
| Specific Gravity @60℉ | ASTM D-287 | 0.88 |
| Viscosity @40℃, cSt. | ASTM D-445 | 14 |
| Flash Point, PMCC | ASTM D-93 | 295℉(℃146℃) |
| Pour Point | ASTM D-97 | -25℃ |
| Copper Corrosion Prevention | ASTM D-130 | 1A |
| Rust Prevention | ASTM D-665 | |
| Distilled Water | Pass-Clean | |
| Synthetic Sea Water | Pass-Clean | |
| Four Ball Wear | ASTM D-2266 | 0.40 mm |